USB to DC Power Jack

 99.00

The USB to DC Plug cable is a perfect solution for mobile applications, eliminating the need for a wall adapter for charging these devices. Connect The devices connect directly the DC socket using a USB cable (typically Micro-to-Type A).

Adapter 5V, 2A

 179.00

An adapter is a physical device that allows one hardware or electronic interface to be adapted (accommodated without loss of function) to another hardware or electronic interface. In a computer, an adapter is often built into a card that can be inserted into a slot on the computer's motherboard.

Sand Paper Pack

 99.00

Sandpaper is produced in a range of grit sizes and is used to remove material from surfaces, either to make them smoother (for example, in paintings and wood finishing), to remove a layer of material (such as 'old paint'), or sometimes to make the surface rougher (for example, as a preparation for gluing).

Various Grit - 80,100,120,200,300 - 5pcs each

DC Motor

 159.00

A DC motor is any of a class of rotary electrical machines that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by magnetic fields. Nearly all types of DC motors have some internal mechanism, either electromechanical or electronic; to periodically change the direction of current flow in part of the motor.
The DC Motor or Direct Current Motor to give it its full title, is the most commonly used actuator for producing continuous movement and whose speed of rotation can easily be controlled, making them ideal for use in applications were speed control, servo type control, and/or positioning is required. A DC motor consists of two parts, a “Stator” which is the stationary part and a “Rotor” which is the rotating part.
 

Normal DC motors have almost linear characteristics with their speed of rotation being determined by the applied DC voltage and their output torque being determined by the current flowing through the motor windings. The speed of rotation of any DC motor can be varied from a few revolutions per minute (rpm) to many thousands of revolutions per minute making them suitable for electronic, automotive or robotic applications. By connecting them to gearboxes or gear-trains their output speed can be decreased while at the same time increasing the torque output of the motor at a high speed.
 

PLA Filament

 1180.00

Polymaker PolyBox Edition II 3D Printer Filament Storage Box, Filament Holder, Spool Holder, Keeping Filaments Dry During The Printing.The humidity can be maintained below 15% to prevent filament moisture absorption. 

Cable Tie Pack

 199.00

A cable tie is generally known as a zip tie or tie-wrap and its a type of fastener, especially for binding several electronic cables. Commonly used to bind wires together and to organize cables and wires.

Type: Small , Medium, Big in pack of 100 each

Component Storage & Organizer box

 2596.00

Taparia Plastic Tool Box with Organizer is sturdy and long lasting organizer for your tools and stuffs. It is available with metal rod hinges that help you carry more load easily. Store all the small objects and fasteners in the organiser sections available on the top.

Comes with 25 small separate boxes which can be drawn out.

Brand: Alkon 

Stepper motor with Driver Board

 199.00

The ULN2003 stepper motor driver PCB provides a direct drive interface between your microcontroller and stepper motor. The PCB provides 4 inputs for connection to your microcontroller, power supply connection for the stepper motor voltage, and ON/OFF jumper, a direct connect stepper motor header and 4 LEDs to indicate stepping state.

Stepper Motor Connection: 
Connect stepper motor to this header. If you use one of our stepper motors they will just plug directly into the header. If you have another brand without the correct header plug, you could solder the wires directly to the back of the PCB. 

Step State LEDs:
Indicate which channel is active. 

Relay Module (2 Channels)

 119.00

A relay is defined as an electrically operated switch; their main use is controlling circuits by a low-power signal or when several circuits must be controlled by one signal.

Rechargeable Battery 11.1V 2000 MAH

 549.00

A rechargeable battery, storage battery, secondary cell, or accumulator is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to a disposable or primary battery, which is supplied fully charged and discarded after use.

Rechargeable Battery Charger

 299.00

Specifications:

• Specially designed for 9 Volt Li-Ion Rechargeable batteries
• Input: 100 - 240 VAC 50/60 Hz
• Output: 8.4V 300 mAh 
• Dimension: 3.5'' L x 1.5'' W x 1" H.

Features:

• Multi Voltage for International Travel
• Power Portable
• Built in IC to cut off power automatically when battery is fully charge 
• Intelligent charger designed for all types of 7.2V (2 cells) Li-Ion / Li-Poly Battery packs. 
• 9V two button connector installed on the charger 
• Red LED indicate battery is charging, and Green LED shows full. (LED also is Green without battery) 
• Compact size and lightweight easy to carry for RC air/car

Note: 

Should only be used with:
9 Volt Powerizer Lithium Ion Battery (500 mAh)