MechanzO 6+

 2490.00    2365.00

MechanzO Robotic Kits are the perfect way to learn about Robotics.When one builds and assembles a robot, one learns various aspects of Science, elementary Electronics and Mechanics.The kit aims at fostering creativity and build a sharp IQ in a child! Children have a lot of fun working on MechanzO 6+ and so it makes an excellent 'fun-education' gift.

Key features of the 'MechanzO 6+' kit are:-

• Contains 150+ parts such as a Remote, Controller Brick, Motors & Gears, Metal strips & bars etc.
• Any number of models can be built using the parts provided! Helps kids to expand their imagination and creativity!
• The kit can be used to make tens of working models...Few of the ones which can be built are 5 Wheeler Car, Aeroplane, Boat, Elephant, Fly Bird.
• With the help of ABL's custom Controllers, Connectors & Cables the kids can give shape to their imaginations in no time!
• Comes with an Assembly Guide providing step by step instructions including a number of illustrations to assemble models of their choice with no difficulty whatsoever.
• Nurtures creativity in the student and helps in developing a good IQ
• It’s a wonderful aid to explore science concepts through Robotics
• The kit conforms to all common safety & environmental standards, is completely safe to use.

MechanzO 9+

 3990.00    3900.00

MechanzO Robotic Kits are the perfect way to learn about Robotics.When one builds and assembles a Robot with Sensing & Controlling capabilities, one learns various aspects of Science, Technology, Engineering & Math (STEM).STEM is regarded as the IDEAL ENABLER for 'Experiential Learning' globally Learning by way of doing, and in a 'fun' way.The kit aims at fostering creativity and building a sharp IQ in the children.A child will have a lot of fun working on MechanzO 9+ Using this kit a number of programmable 'multi-function' robots or 'Bots' in short can be built.

Key features of the 'MechanzO 9+' kit are:-

• Contains 200+ parts such as a Remote, Controller Brick, Motors & Gears, Wheels & Harness, Metal Plates, Strips & Bars etc.
• The kit can be used to make a number of models...Few of the ones which can be built - Charkha, Harvester, Monkey, Crazy Car, Robotic Arm, Hitting Robot.
• An Assembly Guide providing step-by-step instructions to build the models, also explaining the science concept(s) behind every model.
• With the help of ABL's custom Controllers, Connectors & Cables the kids can give shape to their imagination in no time!
• The kit conforms to all common safety & environmental standards, is completely safe to use!

MechanzO 12+

 7490.00    7115.00

MechanzO Robotic Kits are the perfect way to learn about Robotics.When one builds and assembles a Robot with Sensing & Controlling capabilities, one learns various aspects of Science, Technology, Engineering & Math aka (STEM) which is regarded as the IDEAL PATH for 'Experiential Learning' globally - Learning by way of doing, and in a 'fun' way. The kit aims at fostering creativity and building sharp IQ in children. children will have a lot of fun working on MechanzO 12+ and using this kit a number of programmable 'multi-function' robots or 'Bots' in short can be built.

Students are exposed to near real-world problem-solving ecosystem including an easy-to-use GUI programming environment, LinkUP as well as a number of input, output & access elements, helping them build 'automation' bots, besides off-course clearing any grey areas that may exist on the science concepts taught in the classrooms.

This kit is best suited for students of ages 10 and above:-

Key features of the 'MechanzO 12+' kit are:-

• Contains 200+ parts such as Programmable Controller Disc, Sensors, Motors, Gears, Harnesses & Wheels, Metallic Plates, Bars & Shafts, Displays etc.
• Accompanied with ABL Education's in-house developed light-weight GUI Programming Environment with drag & drop blocks, Free-hand links, debugging therby helping create flow-based logic within no time
• A number of sample models which help the students get started with - 3D Robotic Arm , Crazy Car , Drawing Robot , Human Robot ,Line Follower Robot ,Obstacle Avoider Robot , Separator , Walker , Surface Color Identifier and Photophobe Robot.
• An Assembly Guide providing step-by-step instructions to build the models, also explaining the science concepts behind every model
• The kit conforms to all common safety & environmental standards, is completely safe to use.

MechanzO 14+

 6990.00    6640.00

MechanzO Robotic Kits are the perfect way to learn about Robotics.When one builds and assembles a Robot with Sensing & Controlling capabilities, one learns various aspects of Science, Technology, Engineering & Math aka (STEM) which is regarded as the IDEAL PATH of 'Experiential Learning' globally learning by way of doing, and in a fun way.The kit aims at fostering creativity and building a sharp IQ in the children.

The students will have a lot of fun working on the 'MechanzO 14+' kit as well as get a taste of the 'real-world' coding by working on 'C++' programming in the 'IDE' that comes as part of the standard Arduino ecosystem.

This kit enables a budding enthusiast to lay his/her hands on quite a few of the elements that help solve 'real-world' problems when pieced together thoughtfully.

Ideal for kids of ages 11 years or above.

Key features of the 'MechanzO 14+' kit are:-

• Contains 200+ parts such as Programmable Controller Disc, Sensors, Motors, Gears, Harnesses & Wheels, Metallic Plates, Bars & Shafts, Displays etc.
• Includes the standard Arduino IDE for students to build their bots & kits' 'motion-sense-trigger' logic using C++ programming
• Includes a few ideas on the 'models' that can be built - Crazy Car, Crossing Gate, Don't Touch Me, Line Counter, Wall Follower, Rotation Counter, Sound Identifier.
• Includes an Assembly Guide providing step-by-step instructions to build the models.
• The kit conforms to all common safety & environmental standards, is completely safe to use.

MechanzO 10+

 3990.00    3900.00

Robotics Tinkering Kit is a self-paced DIY learning kit for Robotics enthusiasts who are interested in learning Electro-mechanics as well as Automation Building Problem-solving Bots using the Arduino ecosystem, including the embedded C++ programming required.

When one builds Robots with Sense-Trigger capabilities, one learns various aspects of Science, Technology, Engineering & Math (STEM) besides, off-course, the Structures & Motion kinematics of the Bots.

The kit contains all the components required for hassle-free 'Multi-function' Robotics learning

It is accompanied with comprehensive documentation, containing Datasheets, 'Application Notes' and Sample Programs, which greatly eases the learning process.

Ideal for kids of ages 12 years and above.

Key features of the 'Robotics Tinkering' kit are:-

• Contains an Arduino 'Uno' MCU Board along with Shields, Modules and Accessories including Motor Driver Shield, BO Motors, Gears, Wheels, Analog IR Sensor, Touch Sensor, Bluetooth HC-05, LCD - 16x2..
• Includes the latest version of the Arduino IDE with a few sample programs and an introductory guide to programming for rank beginners..
• A number of multi-function' bot models can be built using this kit exhibiting various capabilities viz. Go Fast Robot, 4WD Robot, Line Counter Robot, BT CarBot..
• Includes comprehensive documentation including Datasheets and 'Application Notes' providing step-by-step instructions on how to use the diffferent parts - Shields, Modules & Other Elements along with the UNO processing board, also on coding as stated above with a couple of Sample Programs included..
• The kit conforms to all common safety & environmental standards, is completely safe to use.

Components' included in the kit are:

• Arduino Uno Board
• Motor Driver Shield - L298
• Analog IR Sensor
• Touch Sensor
• Mini Breadboard
• LCD Module - 16x2
• Robotics Accessories – Metal strips, bars, Gears, BO Motors, Wheels, Nuts & Screws etc.
• USB Cable - Type A to B
• 12V Adapter
• 6xAA Battery Holder with DC Jack
• Bluetooth Module - HC05
• Single-Pin Burge Strips (F2F, M2M, M2F)

GPS Module

 699.00

GPS receivers are generally used in smartphones, fleet management system, military etc. for tracking or finding location. Global Positioning System (GPS) is a satellite-based system that uses satellites and ground stations to measure and compute its position on Earth. GPS is also known as Navigation System with Time and Ranging (NAVSTAR) GPS. GPS receiver needs to receive data from at least 4 satellites for accuracy purpose. GPS receiver does not transmit any information to the satellites.The GPS receiver is used in many applications like smartphones, Cabs, Fleet management etc.
 
SPECIFICATIONS:
•    Positional accuracy (CEP50) autonomous positional error less than 2.5 meters
•    SiRF Star IV GPS chip
•    Satellite-based augmentation systems: WAAS, EGNOS, MSAS, GAGAN
•    High sensitivity navigation engine (PVT) tracks as low as –163 dBm
•    Modbus slave device; RS-485 half-duplex serial communications
•    Internal GPS updates once every second
•    Environmental rating: IP69K per DIN 40050
•    Operating temperature of −40 °C to +80 °C (−40 °F to +176 °F)
•    Available with a 2 meter integral cable with flying leads

L293D Motor Driver Shield

 109.00

The L293 and L293D devices are quadruple high-current half-H drivers. The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Both devices are designed to drive inductive loads such as relays, solenoids, DC and bipolar stepping motors, as well other high-current/high-voltage loads in positive-supply applications.
Each output is a complete totem-pole drive circuit, with a Darlington transistor sink and a pseudo- Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. The L293 and L293D are characterized for operation from 0°C to 70°C.

FEATURES:

•    Wide Supply-Voltage Range: 4.5 V to 36 V
•    Separate Input-Logic Supply
•    Internal ESD Protection
•    High-Noise-Immunity Inputs
•    Output Current 1 A Per Channel (600 mA for L293D)
•    Peak Output Current 2 A Per Channel (1.2 A for L293D)
•    Output Clamp Diodes for Inductive Transient Suppression (L293D)

IR Obstacle Avoider Sensor Module

 99.00

An infrared sensor is an electronic device that emits in order to sense some aspects of the surroundings. An IR sensor can measure the heat of an object as well as detects the motion. These types of sensors measure only infrared radiation, rather than emitting it that is called as a passive IR sensor. The IR sensor module consists mainly of the IR Transmitter and Receiver, Opamp, Variable Resistor (Trimmer pot), output LED in brief.

Geared DC Motor(300 Rpm)

 149.00

300RPM Centre Shaft Economy Series DC Motor is high quality low cost DC geared motor. It has steel gears and pinions to ensure longer life and better wear and tear properties. The gears are fixed on hardened steel spindles polished to a mirror finish.The output shaft rotates in a plastic bushing.The whole assembly is covered with a plastic ring. Gearbox is sealed and lubricated with lithium grease and require no maintenance. The motor is screwed to the gear box from inside.
Although motor gives 300 RPM at 12V but motor runs smoothly from 4V to 12V and gives wide range of RPM, and torque

Tables below gives fairly good idea of the motor’s performance in terms of RPM and no load current as a function of voltage and stall torque, stall current as a function of voltage.

Specifications of the product are:-

DC supply: 4 to 12V
RPM: 300 at 12V
Total length: 46mm
Motor diameter: 36mm
Motor length: 25mm
Brush type: Precious metal
Gear head diameter: 37mm
Gear head length: 21mm
Output shaft: Centred
Shaft diameter: 6mm
Shaft length: 22mm
Gear assembly: Spur
Motor weight: 90gms

DC Motor

 159.00

A DC motor is any of a class of rotary electrical machines that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by magnetic fields. Nearly all types of DC motors have some internal mechanism, either electromechanical or electronic; to periodically change the direction of current flow in part of the motor.
The DC Motor or Direct Current Motor to give it its full title, is the most commonly used actuator for producing continuous movement and whose speed of rotation can easily be controlled, making them ideal for use in applications were speed control, servo type control, and/or positioning is required. A DC motor consists of two parts, a “Stator” which is the stationary part and a “Rotor” which is the rotating part.
 

Normal DC motors have almost linear characteristics with their speed of rotation being determined by the applied DC voltage and their output torque being determined by the current flowing through the motor windings. The speed of rotation of any DC motor can be varied from a few revolutions per minute (rpm) to many thousands of revolutions per minute making them suitable for electronic, automotive or robotic applications. By connecting them to gearboxes or gear-trains their output speed can be decreased while at the same time increasing the torque output of the motor at a high speed.
 

Servo Motor - Metal Gear, 180, MG995

 349.00

Since MG995 is a servo motor providing precise rotation over 180º range its applications are many and amongst them a few are stated below:

• The servo is suited for designing robotic arm in which wear and tear of motor is high. Being metal geared, the servo has long life and can be installed on system like robotic arm were motor work is huge.
   
• The servo is also suited to be used in drones and toy planes. Having a satisfying torque which is enough to overcome air resistance and control wings of plane, the servo is preferred in toy planes and drones which need precision control no matter the condition.

Micro Servo Motor - Metal Gear, 180, MG90

 399.00

MG90S servo, Metal gear with one bearing Tiny and lightweight with high output power, this tiny servo i Helicopter, Quad copter or Robot durability. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially si (arms) and hardware.

Specifications:

• Weight: 13.4 g

 • Dimension: 22.5 x 12 x 35.5

• Stall torque: 1.8 kgf-cm (4.8V)

• Operating speed: 0.1s/60 degree

• Operating voltage: 4.8 V –

• Dead band width: 5 µs

MG90S servo, Metal gear with one bearing Tiny and lightweight with high output power, this tiny servo i Helicopter, Quad copter or Robot durability. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially si (arms) and hardware.

Specifications:

• Weight: 13.4 g

 • Dimension: 22.5 x 12 x 35.5

• Stall torque: 1.8 kgf·cm (4.8V)

• Operating speed: 0.1 s/60 degree

• Operating voltage: 4.8 V –

• Dead band width: 5 µs

Stepper motor with Driver Board

 199.00

The ULN2003 stepper motor driver PCB provides a direct drive interface between your microcontroller and stepper motor. The PCB provides 4 inputs for connection to your microcontroller, power supply connection for the stepper motor voltage, and ON/OFF jumper, a direct connect stepper motor header and 4 LEDs to indicate stepping state.

Stepper Motor Connection: 
Connect stepper motor to this header. If you use one of our stepper motors they will just plug directly into the header. If you have another brand without the correct header plug, you could solder the wires directly to the back of the PCB. 

Step State LEDs:
Indicate which channel is active. 

L298P Motor Driver Shield

 249.00

The L298 Driver is a high voltage, high current dual full bridge driver designed to accept standard TTL logic levels and drive inductive loads such relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together the corresponding external terminal can be used for the connection of an external sensing resistor.
 

Features:

• Operating supply voltage up to 46 V 
• Total DC current up to 4 A 
• Low saturation voltage
• Over temperature protection
• Logical "0" input voltage upto1.5 V (HIGH NOISE IMMUNITY)
• Two motor direction indicator LEDs 
• An onboard user-accessible 5V low-dropout regulator
• Schottky EMF-protection diodes
• Screw-terminals for power and motor connections
• High quality PCB FR4 Grade with FPT Certified

Servo Motor Tester

 249.00

The Servo Motor Tester can be used to manually operate a servo motor clockwise and anti-clockwise direction. By pushing the forward or reverse button for a short period of time you can control the rotation of the servo. It will also test a servo. A Servo is a small device that has an output shaft. This shaft can be positioned to specific angular positions by sending the servo a coded signal. As long as the coded signal exists on the input line, the servo will maintain the angular position of the shaft. The angular position of the shaft is determined by the duration of a pulse that is applied to the control wire. This is called Pulse Coded Modulation.

In the Servo Motor Tester when using a servo motor in if it does not respond as per the input, how to make sure that the fault is not in the servo motor but the circuit or logic One way is to isolate the servo motor from the circuit and check its proper working by feeding it pulses of varying width and checking the angle that the servo motor turns to. Hear a 555 timer IC use to operate the servo motor. The circuit is designed to give control signals to the Servo. The LM555 timer IC is designed as an Astable multi vibrator which can give pulses for the operation of the Servo. BC547 is used here to amplify the signal of timer IC, as the current required by the servo motor is large
 

BO Motor, 150 RPM

 99.00

This is a standard low cost low voltage durable Dual Shaft Plastic Gear BO Motor running at 150 RPM. It is most suitable for light weight robot running on voltages between 5V-9V. Out of its two shafts one shaft can be connected to wheel, while the other can be connected to an encoder.

Features:

• Gear materials: plastic
• Motor types: Permanent Magnet
• Brush-type: Brushed
• Magnet types: Ferrite Magnets
• Torque multiplication: Generates a large force at a low speed
• Low density: Lightweight and Low Inertia
• Uniformity of parts
• Capability to absorb shock and vibration as a result of elastic compliance
• Ability to operate with minimum or no lubrication, due to inherent lubricate
• Relatively low coefficient of friction
• Corrosion-resistance; elimination of plating, or protective coatings
• Consistency with trend to greater use of plastic housings and other components

Servo motor Plastic Gear SG90

 179.00

This analog micro servo will rotate up to 180 degrees (90 in each direction). You can expect it to operate the same as standard versions, but this micro servo is much smaller and can fit into tighter spaces. Its lightweight (9g) design will still output a high amount of power. This servo will work with any servo library, code, or compatible hardware.