A ratcheting screwdriver is used for tightening and loosening screws the advantage of a ratcheting screwdriver over a regular screwdriver is that the user needs to keep their hands in the same position while holding the handle and has to rotate the handle to set the screw.
Brand: CIC - 41 Pcs.
Black & Decker HG1300 Dual Temperature Heat Gun has 2 temperature settings (750C and 1000C) used for a variety of applications. It can be used for removing paint and varnish, loosening rusted nuts and bolts, thaw frozen pipes, or quick dry almost anything.
These pliers can bend, cut and grip where fingers and other tools are too big or clumsy. Needle-nose pliers are good for reaching into tight spots where regular pliers are unwieldy. They can grip multiple wires and even pick up small screws with a strong secure grip.
The holes are used to accept pegs or hooks to support various items, such as tools in a workshop. Peg-Board is an expired trademark used as a brand name by the Masonite Corporation, first used in 1962, which is often used as a generic term for perforated storage boards made of hard board, wood, metal, or other material.
A ball peen hammer is a good choice for working with metals. Its steel head is harder than that of a claw hammer, so is less likely to chip on impact. Ball peen hammers are commonly used to drive cold chisels, set rivets as well as bend and shape metal.
A claw hammer is a tool primarily used for driving nails into, or pulling nails from some other object It is not suitable for heavy hammering on metal surfaces (such as in machining works), as the steel of its head is somewhat brittle the ball-peen hammer is more suitable for such metal work.
The Dremel 220 Workstation Combined Drill Press and Tool Holder is a drill press, tool holder and flex shaft holder - all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescopic flex shaft holder extends to any height between 16 and 29 inches.
Flexible Cutting Mats protect the countertops as well as other surfaces. These cutting mats are bendable and flexible for convenience, making it easy to funnel food directly into pans and other containers. These mats are color coded for different food groups.
A3 Size with Marked Pattern And Grids (18" * 12")
Screwdriver, usually hand-operated, for turning screws with slotted heads. For screws with one straight diametrical slot cut across the head, standard screwdrivers with flat blade tips and in a variety of sizes are used The screwdriver shank is made of tough steel, and the tip is hardened to minimize wear.
A mini hacksaw is a fine-toothed saw, originally and mainly made for small cutting metal. Most hacksaws are hand saws with a C-shaped frame that holds a blade under tension. Such hacksaws have a handle, usually a pistol grip, with pinions to fasten narrow disposable blade at the ends.
An adjustable wrench, also called an adjustable spanner or an adjustable crescent is a tool which can be used to loosen or tighten a nut or bolt. It has a "jaw" (the part where the nut or bolt fits), which is of adjustable size...Open the adjustable wrench by turning the screw mechanism.
A file is a tool used to remove fine amounts of material from a workpiece. It is common in wood working, metal working, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular or round cross-section, with one or more surfaces cut with sharp, generally parallel teeth. A narrow, pointed tang is common at one end, to which a handle may be fitted.
6 Pcs. of 6 inches file each
A cordless drill is an electric drill which uses rechargeable batteries. These drills are available with similar features to an AC mains-powered drill...They are available in the hammer drill configuration and most have a clutch, which aids in driving screws into various substrates while not damaging them.
Taparia Plastic Tool Box with Organizer is sturdy and long lasting organizer for your tools and stuffs. It is available with metal rod hinges that help you carry more load easily. Store all the small objects and fasteners in the organiser sections available on the top.
Comes with 25 small separate boxes which can be drawn out.
A screwdriver is a tool, manual or powered, for screwing (installing) and unscrewing (removing) screws. A typical simple screwdriver has a handle and a shaft, ending in a tip the user puts into the screw head before turning the handle. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw or ridged or treated for additional 'grip'. Handles are typically wood, metal, or plastic and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. Some manual screwdrivers have interchangeable tips that fit into a socket on the end of the shaft and are held in mechanically or magnetically. These often have a hollow handle that contains various types and sizes of tips, and a reversible ratchet action that allows multiple full turns without repositioning the tip or the user's hand.
The Servo Motor Tester can be used to manually operate a servo motor clockwise and anti-clockwise direction. By pushing the forward or reverse button for a short period of time you can control the rotation of the servo. It will also test a servo. A Servo is a small device that has an output shaft. This shaft can be positioned to specific angular positions by sending the servo a coded signal. As long as the coded signal exists on the input line, the servo will maintain the angular position of the shaft. The angular position of the shaft is determined by the duration of a pulse that is applied to the control wire. This is called Pulse Coded Modulation.
In the Servo Motor Tester when using a servo motor in if it does not respond as per the input, how to make sure that the fault is not in the servo motor but the circuit or logic One way is to isolate the servo motor from the circuit and check its proper working by feeding it pulses of varying width and checking the angle that the servo motor turns to. Hear a 555 timer IC use to operate the servo motor. The circuit is designed to give control signals to the Servo. The LM555 timer IC is designed as an Astable multi vibrator which can give pulses for the operation of the Servo. BC547 is used here to amplify the signal of timer IC, as the current required by the servo motor is large
Needle-nose pliers (also known as pointy-nose pliers, long-nose pliers, pinch-nose pliers or snipe-nose pliers) are both cutting and holding pliers used by artisans, jewelry designers, electricians, network engineers and other tradesmen to bend, re-position and snip wires.
Glue sticks are common place adhesive used for everyday jointing/ fixing/ sticking applications. Hot melt adhesive (HMA), also known as 'hot glue', is a form of thermoplastic adhesive that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a 'hot glue gun'.
Pack of 50 gluesticks.
Drilling machine can be defined as a machine which makes a circular hole in the job by removing volume of the metal from it with the help of a cutting tool called drill bit. When drilling is performed by the drilling machine the drill bit i.e. the cutting tool is rotated along its own axis into the job.
A file is a tool used to remove fine amounts of material from a workpiece. It is common in woodworking, metalworking, and other similar trade and hobby tasks. Most are hand tools, made of a case hardened steel bar of rectangular, square, triangular, or round cross-section with one or more surfaces cut with sharp, generally parallel teeth. A narrow, pointed tang is common at one end, to which a handle may be fitted.